Blog
  1. Home
  2. Blog
  3. Buying Guides
Buying Guides 5 min read

Bed Hydraulic Pump Price and Size Guide: 100, 150 or 200 kg?

Bed Hydraulic Pump Price and Size Guide: 100, 150 or 200 kg?

Which bed hydraulic pump capacity fits your storage bed, what it costs, and when to choose a complete bed lifter. Prices, sizes and fitting tips from Home Care.

Quick answer: For most single and double storage beds a 150 kg bed hydraulic pump set works well. For queen and king size beds with a heavy plywood top and a thick mattress, choose 200 kg. Home Care bed hydraulic pumps come as a set of 2. MRP on 15 Nov 2026: 150 kg set Rs 1,620 and 200 kg set Rs 1,800 (inclusive of taxes).

A hydraulic storage bed is only as good as the pump that lifts it. If the pump is too weak, the bed top drops on your hands. If it is too strong, the bed is hard to close and keeps springing open. This guide explains how to pick the right capacity, what a fair price is, and when a complete bed lifter is the better buy.

What is a bed hydraulic pump?

A bed hydraulic pump, also called a bed gas lift or bed jack, is a sealed cylinder filled with gas. It is fixed between the bed frame and a metal arm on the bed top. When you lift the top, the gas pushes it up and holds it open, so you can reach the storage box under the mattress with one hand.

Pumps are always used in pairs, one on each side of the bed. That is why Home Care sells them as a set of 2 pieces, so both sides have exactly the same force.

Bed hydraulic pump capacity and price

The capacity (100 kg, 150 kg, 200 kg) tells you how much weight the pair is built to support. Use the table as a starting point and confirm with your carpenter, who knows the exact weight of your bed top.

Capacity (set of 2)Usually suitsHome Care productMRP (15 Nov 2026)
100 kgSingle beds and light bed topsBed Hydraulic Pump 100 kgSee product page
150 kgSingle and double beds with a normal mattressBed Hydraulic Pump 150 kg (BLHP-150)Rs 1,620
200 kgQueen and king size beds, heavy tops, thick mattressesBed Hydraulic Pump 200 kg (BLHP-200)Rs 1,800

The 150 kg and 200 kg sets use 15 inch gas pumps. The 150 kg set comes with powder coated MS frames. Dealer and bulk prices are available on request.

How to choose the right capacity

  1. Look at the bed size. A bigger bed means a bigger, heavier top. A king size bed almost always needs more force than a single bed.
  2. Count the weight on the top. The pump lifts the plywood board and the mattress together. A thick plywood board and a heavy spring or coir mattress add a lot of weight.
  3. Do not oversize. A pump much stronger than needed makes the bed hard to close and can push the top open by itself. Pick the capacity that matches the load, not the biggest one.
  4. Check the mounting space. Measure the side rail of the bed so the pump and its arm fit without touching the storage box.
  5. Ask your carpenter. If the top is between two sizes, your carpenter can weigh it or judge from the board thickness before you order.

Pump set or complete bed lifter?

If your bed is already built with metal arms and brackets, a pump set is enough. If you are making a new bed or the old fittings are damaged, a complete mechanism is easier to fit.

The Home Care Bed Lifter (up to 200 kg, BLM-60) is a full lifting mechanism for 5 ft beds, with MS frames and gas pumps. MRP on 15 Nov 2026 is Rs 4,140. It saves the carpenter from making brackets and keeps both sides aligned.

Installation tips

  • Fix both pumps at the same height and angle, so the top rises evenly.
  • Screw the brackets into solid wood or ply, not into thin laminate or MDF edges.
  • Open and close the bed a few times after fitting, before putting the mattress on.
  • Follow the installation PDF on the product page for screw positions.

When to replace a bed hydraulic pump

  • The bed top does not stay open and slowly comes down.
  • You need much more force to lift the bed than before.
  • Oil marks or rust are visible on the cylinder.
  • One side lifts faster than the other.

Always replace both pumps together, so the two sides stay balanced.

Frequently asked questions

What is the price of a 200 kg bed hydraulic pump?

The Home Care 200 kg bed hydraulic pump set (2 pieces) has an MRP of Rs 1,800 as on 15 November 2026, inclusive of taxes. Check the product page for the latest price.

Is the capacity for one pump or for the pair?

Home Care lists capacity for the set of 2 pumps fitted together on one bed.

Which pump is right for a king size bed?

For most king size beds with a heavy top and mattress, the 200 kg set is the right choice.

Can I fit a bed hydraulic pump on an old bed?

Yes, if the bed has a frame strong enough for the brackets. If not, a complete bed lifter mechanism is the easier option.

Do you supply dealers and carpenters?

Yes. Home Care supplies dealers and carpenters across India. Carpenters also earn reward points by scanning the QR code on Home Care products with the Home Care app.

Need help choosing? Call or WhatsApp +91-9089089090, or send your bed size on the contact page. See the full hardware range.

Share this article Facebook Twitter WhatsApp LinkedIn Pinterest
Contact Us On WhatsApp